Instrukcijas un noderīgi padomi (servera iestatijumi)
#1
https://www.servermania.com/kb/articles/...-3-server/

The Minimum ARMA 3 Server Requirements
What's the lowest rig you could get to run an ARMA 3 server?
  • CPU: 2.4GHz dual-core processor
  • RAM: 2GB
  • HDD: 32GB
  • OS: Linux/Windows Server 2008 (or better)
ARMA 3 does not use multi-threading allowing you to save by using a basic dual-core processor. The minimum server specs are about the same as running the game so if it's working on your rig then it'll work on a server.
The Recommended ARMA 3 Server Requirements
Don't want rubberbanding and issues with the hardware?
  • CPU: 3.xGHz+ multi-core processor
  • RAM: 4GB+
  • HDD: 32GB+
  • OS: Linux/Windows Server 2008 (or better)
It's a given that more is always better with dedicated hardware. Consider installing an extra 1GB of RAM for every 10 extra players on your server. This requirement is right in-line with the recommended specs for the game.
"Kā cilvēks, kam trūkst pašcieņas, nav dīdzējs, bet nīcējs, tā arī tauta, kurai nav pašapziņas." K.Mīlenbahs
Atbilde
#2
https://community.bistudio.com/wiki/Arma...ted_Server


  1. Steam Account
  2. Supported Operating System:
    • Windows Server 2008 or later
    • A modern Linux distribution
  3. Minimum Hardware:
Part
Minimum/Recommended
CPU
2.4 GHz Dual-Core/3.5 GHz Quad-Core
RAM
2GB /4GB
Storage
32 GB HDD /32 GB SSD
"Kā cilvēks, kam trūkst pašcieņas, nav dīdzējs, bet nīcējs, tā arī tauta, kurai nav pašapziņas." K.Mīlenbahs
Atbilde
#3
Citāts:About steamCMD utility: if you are using it on a dedicated host to install and update Arma 3 dedicated server, it is a good practice to create a separate steam account for that. Arma 3 Dedicated server package is available for free (does not require regular Arma 3 to be purchased).
"Kā cilvēks, kam trūkst pašcieņas, nav dīdzējs, bet nīcējs, tā arī tauta, kurai nav pašapziņas." K.Mīlenbahs
Atbilde
#4
Atsevišķs Steam konts noderot arī priekš Headless Client (mūs no apraksta pagaidām interesē sadaļas 1, 3 un 4 - savas misijas, kurām šo varētu vajadzēt, tuvākā laikā diez vai taisīsim)
Atbilde
#5
Antistasi un Liberation seivu ArmA glabā vienā un tajā pašā failā. Viņš atrodas:
1. ja tiek lietots defaultais jūzera profils (t.i. spēlētāja konts Armā sakrīt ar Windows lietotāju) - tad ceļš ir Documents -> ArmA 3 -> USER.vars.Arma3Profile (kur USER - Windows lietotāja konta nosaukums);
2. ja tiek lietots Armā no jauna uztaisīts profils ar sev vēlamo niku, tad ceļš ir Documents -> ArmA 3 - Other Profiles -> PROFILE -> PROFILE.vars.Arma3Profile (kur PROFILE - tas profils, kurš tiek lietots Armas vidē; manā gadījumā tas ir "Hobbit").

Ļoti iespējams, ka tas fails glabā arī vēl kaut ko, arī ārpus abu nosaukto misiju seiviem.

Respektīvi, ja gribi saglabāt savu progresu single Antistasi vai Liberation - taisi bekapu šim failam. Turklāt ar viņu minētos seivus var pārnest starp profiliem - tad jāpārkopē fails uz vajadzīgo folderi un attiecīgi jānomaina nosaukumā USER uz PROFILE vai otrādāk, kā nu vajag.
Atbilde
#6
Kā izskatās misiju saraksta interfeiss, startējot tīkla misiju no hosta:


.png   Arma 3 28.01.2020 00_32_35.png (Size: 280,53 KB / Downloads: 339)

Misiju saraksts uz Altis. Baltās misijas ir vaniļa un pāris, kas nāk komplektā ar RHS, oranžās - Steam parakstītās, zaļās - paštaisītās.

Nomainot karti uz Tanoa, ir šāds misiju saraksts:


.png   Arma 3 28.01.2020 00_33_54.png (Size: 261,1 KB / Downloads: 344)
Atbilde
#7

==============================
*****      Arma 3      *****
*      Dedicated Server      *
*          Windows          *
==============================

Physics simulation powered by NVIDIA® PhysX®.

>>> www.arma3.com <<<



Usage
=====
To start the Dedicated Server, run the arma3server.exe binary from the installation folder.
Find more information about setup and usage at http://community.bistudio.com/wiki/Arma_...ted_Server



Installation
============

System Requirements (minimum):
------------------------------
• OS: Windows 7 SP1 64-bit
• CPU: Intel Dual-Core 2.4 GHz / AMD Dual-Core Athlon 2.5 GHz
• DirectX®: 9
• RAM: 2 GB
• HDD: 5 GB free space
• Other:
        Internet connection

System Requirements (recommended):
---------------------------------
• OS: Windows 7 / 8 / 10 64-bit
• CPU: Intel Core i5-4460 / AMD FX 4300
• DirectX®: 9
• RAM: 4 GB
• HDD: 10 GB free space, SSD / Hybrid HDD / SSHD storage
• Other:
        Internet connection

Setup
-----
You may find the Arma 3 Server tool in the Steam library, by switching the library filter to "Tools". Please follow the instructions provided in the Steam client application.
You may also install the Arma 3 Server via SteamCMD (https://developer.valvesoftware.com/wiki/SteamCMD). Its app ID is 233780.

DirectX
-------
If you encounter a problem installing DirectX during the installation, please update DirectX manually. DirectX June 2010 is required in order to run the server, you can find it at http://www.microsoft.com/en-us/download/...px?id=8109



Overview
========
The Arma 3 Server is a free, separate and stand-alone Dedicated Server package for Arma 3. By using it you agree to the license agreement (http://store.steampowered.com/eula/107410_eula_0).

Key features
------------
• Dedicated Server command window
• Server administration commands

Updates
-------
We aim to update the server package with fixes, updates and additions (along with the main game). Keep checking the Arma 3 website arma3.com, as well as the forums and social channels.

Feedback
--------
Your feedback and bug reports are welcome and can help us to improve the game and server significantly. Please visit feedback.arma3.com to learn how to submit feedback. Thank you kindly for your support!



Troubleshooting
===============

Useful links:
-------------
• Main website: www.arma3.com
• Socials: www.facebook.com/arma3official, www.twitter.com/arma3official, www.youtube.com/arma3official, www.twitch.tv/arma3official
• Developed by: www.bistudio.com
• Forums: forums.bistudio.com (English Only)
• Community wiki: community.bistudio.com (English Only)

Installation problems:
----------------------
• In order to verify the data you have downloaded was not corrupted during transfer, please use the Steam tool cache verification option.
• Make sure to do a clean installation of Arma 3 Server (uninstall first - by removing the local tool cache).
• Make sure all the necessary drivers are up-to-date.



Legal
=====
© 2013-2016 Bohemia Interactive a.s. Arma® and Bohemia Interactive® are registered trademarks of Bohemia Interactive a.s. All rights reserved.

NVIDIA GameWorks™ Technology provided under license from NVIDIA Corporation. Copyright © 2002-2016 NVIDIA Corporation. All rights reserved. NVIDIA® and PhysX® are trademarks of NVIDIA Corporation and are used under license.

© 2016 Valve Corporation. Steam and the Steam logo are trademarks and/or registered trademarks of Valve Corporation in the U.S. and/or other countries.

Portions of this software utilize Simul True Sky technology (© 2015 Simul Software Ltd, all rights reserved).
Spēlēt vai nespēlēt - mūžīgais jautājums!
Atbilde
#8
https://www.youtube.com/watch?v=CMLQ3gSOi2Y
Spēlēt vai nespēlēt - mūžīgais jautājums!
Atbilde
#9
http://www.armaholic.com/page.php?id=29385
Atbilde
#10
https://community.bistudio.com/wiki/Mult...r_Commands

HowTo
You can access the command line by pressing the chat key ( default: / ).
In the chat input window you can type any of the following commands in and confirm them with the enter key.
You have to add the # character before the command.
Troubleshooting: All commands are confirmed via a message in the console. If you enter a command that is properly formatted and you see no confirmation of the command then an error has occurred. Check your server log for more information (e.g. one or more of your mission files is corrupt or has an error which prevents the Missions Lobby from loading, or may prevent other commands like #restart or #reassign from executing).
Commands
The following commands are available to you once you have connected to a server:
Admin
Command
Example
Description
#login
#login password

#login
#login adminPW

Log in as the admin. Without password only possible if you an admin[] in server.cfg#Server_Options
#logout

Admin log out.
#mission filename
#mission filename difficulty
#mission myDM.intro
#mission myDM.intro Veteran
Select mission with known name and set the difficulty. Difficulty parameter is optional and if not set, current difficulty is kept.
#missions

Select mission.
#restart

Restart mission.
#reassign

Start over and reassign roles.
#shutdown

Shuts down the server.
#restartserver

Shuts down and restarts the server (since Arma 3 v1.65.138168)
#init

Reload server config file loaded by -config option.
#exec ban name
#exec ban ID
#exec ban Player#
#exec ban nickName
#exec ban 47114712
#exec ban 3
Allows you to ban a player. Their ID will be added to the ban.txt
#kick name
#kick ID
#kick Player#
#kick nickName
#kick 47114712
#kick 3
Allows you to kick a player.
#monitor (interval in sec)
#monitor 1
Shows performance information of the server. Interval 0 means to stop monitoring.
#monitords (interval in sec)
#monitords 1
Shows performance information in the dedicated server console. Interval 0 means to stop monitoring. (since Arma 3 v1.64)
#debug off
#debug off
Disables debugging.
#debug (interval in sec)
#debug 30
Default interval is 10 seconds.
#debug (command) (param)
#debug checkFile expansion\Dta\ui.pbo
#debug userSent <username>
#debug userInfo <username>
#debug userQueue <username>
#debug JIPQueue <username>
#debug totalSent 10
The available commands are:
checkFile userSent userInfo userQueue totalSent JIPQueue
Each command can be disabled by the use of the off parameter e.g. #debug userSent off
Each command differs a bit; some output to screen, some to log file etc.
You need some debugger capable of catching OutputDebugString running on the client machine
(one very small and easy to use is available at SysInternals website).
You launch this debugger, then launch ARMA client, connect to the server, and issue any of the commands.
#debug (command)
#debug von
#debug console
The available commands are:
console
Send to submitter what's on server console. Works as DebugAnswer for all writes into the console.
von
Outputs into logFile defined in server.cfg as e.g. logFile = "server_console.log";
Each of those commands should show a confirmation in the chat channels.
New admin commands since Armed Assault: Command
Description
#exec server side command
Execute administration scripting command.
#lock
Locks the server, prevents new clients from joining.
#unlock
Unlocks the server, allows new clients to join.


"#debug von" sample
server_console.log
*** VoN Topology Diagnostics ((***
=Player=: #2
P2PManager: Time: 13:38:48 waiting edges: 0, active negotiations: 0
Matrix:
  3056006: #2
  #2: 3056006
Cliques:
  3056006,#2
Version: 1.60.86277
Private: 192.168.178.21
Connections:
  3056006: Direct P2P, 5 KA, snd: 10 sec, rcv: 10 sec, (192.168.178.21:2317) snd=0 rcv=0(0) Repl(-5,0,0)
Cliques:
  3056006,Unknown
=Player=: 3056006
Version: 1.60.86277
Private: 192.168.178.21
Public: 77.4.35.154
Connections:
  #2: Direct P2P, 5 KA, snd: 10 sec, rcv: 10 sec, (192.168.178.21:2305) snd=0 rcv=0(0) Repl(-5,0,0)
Cliques:
  3056006,Unknown
*** VoN Topology Diagnostics ))***
"Kā cilvēks, kam trūkst pašcieņas, nav dīdzējs, bet nīcējs, tā arī tauta, kurai nav pašapziņas." K.Mīlenbahs
Atbilde
« Vecāks | Jaunāks »


Pārlēkt uz:


Users browsing this thread: 1 Guest(s)